The Remote has become the veteran of the Kona e-MTB lineup. It’s been a top choice for trail builders, backwoods explorers and sportsmen of all kinds. Derived from the Honzo, a redesigned frame brings a sportier version to the masses and holds a 504 Wh internal battery that powers Shimano’s E7000 motor. 140mm of front suspension is provided by a Suntour Zeron 35 fork. A 10-speed Shimano Deore drivetrain provides reliable shifting while Shimano hydraulic disc brakes keep the speed in check. The all-new Remote is sporty, practical, and perhaps the perfect way to dip your toe into the eBike waters!
- Frame Material: Kona 7005 Aluminum Butted
- Wheels: WTB ST i35 TCS 2.0 29”
- Front Suspension: 140mm
- Fork: Suntour Zeron 35 Coil Spring 140mm
- Crankset: Shimano E8000
- Drivetrain: Shimano Deore 10spd
- Brakes: Shimano MT410 Hydraulic with 203mm front/180mm rear rotor
- Seat Post: TranzX Dropper Internal 31.6mm
- Cockpit: Kona XC/BC 35mm Bar/ XC/BC 35 Stem with Kona Lock-on Key Grip
- Front Tire: Maxxis Minion DHF EXO TR DUAL 29x2.6"
- Rear tire: Maxxis Minion DHR II EXO TR DUAL 29x2.4" WT
- Saddle: WTB Volt
- Motor: Shimano E7000 20mph
- Battery: Shimano 504Wh
- Display: Shimano SC-E7000
|Frame||Kona 6061 Aluminum Butted|
|Sizes||S, M, L, XL
|Fork||Suntour Zeron35 140mm Tapered 110 Spacing|
||Shimano Deore 11-46t 10spd|
|Stem||Kona XC/BC 35|
|Handlebar||Kona XC/BC 35|
|Grips||Kona Key Grip|
|Seatpost||TranzX Dropper Internal 31.6mm|
|Front brake||Shimano RT30 203mm|
|Rear brake||Shimano RT30 180mm|
|Brake lever||Shimano MT410 Hydrualic|
|Brake Calipers||Shimano MT410 Hydrualic|
|Rims||WTB ST i35 TCS 2.0|
|Spokes||Stainless Black 14g|
|Front hub||Shimano 110x15mm|
|Rear hub||Shimano 148x12mm|
|Front tire||Maxxis Minion DHF EXO TR DUAL 29x2.6"|
|Rear tire||Maxxis Minion DHR II EXO TR DUAL 29x2.4" WT|
|Drive Unit||Shimano E7000 20MPH|
|Display||Shimano SC-E7000 Display|
|Charger||Shimano STEPS 2A|
|Paint Color||Gloss Metallic Olive w/ Black & Mauvewood Decals|
|Rear derailleur||Shimano Deore|
|Shift levers||Shimano Deore|
Sizes & Geometry (mm)
|8||Seat tube angle||76.1º||76.1º||76.1º||76º|
KONA 6061 ALUMINUM
Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application.
Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible.
TAPERED HEAD TUBE
More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed.
TUBELESS COMPATIBLE RIMS
Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems.
12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you’ll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle.
Register a new Kona bike within three months of purchase, and the original owner qualifies the Kona frame for a free Lifetime Warranty. Note: this does not apply to Kona Carbon models.
ONE-YEAR LIMITED WARRANTY ON COMPLETE BICYCLE
Kona warrants to the original owner that this new Kona bicycle shall be free of defective materials and workmanship for a period of one year from the date of original purchase in the United States or Canada and operated under normal conditions and use. During this one-year period, Kona shall repair or replace, at its sole option, all parts that are found by Kona to be defective and subject to this limited warranty. The original owner shall pay all labor charges connected with the repair or replacement of all parts.
LIFETIME LIMITED WARRANTY ON BICYCLE FRAME
When warranty on non-carbon Kona bikes and frames is NOT registered within three months of purchase, Kona warrants to the original owner that the frame of this new Kona bicycle purchased from an authorized Kona dealer shall be free of defective materials or workmanship for a three-year period. IF THE WARRANTY IS REGISTERED WITH KONA WITHIN THREE MONTHS AFTER THE PURCHASE OF THE BICYCLE, THE WARRANTY IS EXTENDED FOR THE LIFETIME OF THE ORIGINAL OWNER, with the exception of carbon bikes and frames. During warranty period, Kona shall repair or replace, at its sole option, the bicycle frame if Kona determines the frame is defective and subject to this limited warranty. The original owner shall pay all labor and shipping charges connected with the repair or replacement of the bicycle frame. Please see the Kona owner’s manual, provided with your bicycle, for additional information.
Note: this Limited Lifetime Warranty applies to purchases from Kona U.S.A., Kona Canada and Kona Europe.